How to Connect Your Printer to WiFi?

To connect your printer to WiFi, please follow the steps below:

Step 1: Temporarily Connect to a Wired Network

• Use an Ethernet cable to connect your printer to your network.

Connect Ethernet cable

• Once connected, the printer will display an IP address on its screen.

Step 2: Access the Printer's Web Interface

• Open a web browser on your computer or mobile device.

• Enter the printer's IP address in the address bar and press Enter.

Access Printer in Browser

Step 3: Configure WiFi Settings

• The printer’s settings page will open.

• Navigate to the WiFi Setup section.

• Enter your WiFi network name (SSID) and password.

Configure WiFi Settings

Step 4: Disconnect the Wired Connection

• Once WiFi is set up, disconnect the Ethernet cable.

  
  

  Your printer should now connect to the WiFi network automatically.